{"title":"Gifts $30+ Hero Items","description":"\u003cp\u003eFor the maker who has it all!\u003c\/p\u003e","products":[{"product_id":"soft-silver-and-cotton-conductive-fabric","title":"Soft Silver and cotton conductive fabric","description":"\u003cp\u003eA soft, stretchy conductive fabric with a cotton base — 35% silver, 65% cotton — making it one of the most comfortable options for wearables. Great for buttons, switches, battery holders, and any application where you need conductivity with a gentle, skin-friendly feel.\u003c\/p\u003e\n\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: 35% Silver + 65% Cotton\u003c\/li\u003e\n\u003cli\u003eColour: Silver-gray\u003c\/li\u003e\n\u003cli\u003eStretch: Yes\u003c\/li\u003e\n\u003cli\u003eSizes: 10×10cm | 20×20cm | 30×30cm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eCare:\u003c\/strong\u003e Iron on medium heat if needed, test a corner first, steam is fine. Discolouration over time is normal.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWater quality warning:\u003c\/strong\u003e Silver is sensitive to sulphur, high fluoride, and low pH. Before washing, test your tap water on a small swatch:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSoak a small swatch in tap water for 1 hour\u003c\/li\u003e\n\u003cli\u003eCheck for colour change (blackening is a warning sign)\u003c\/li\u003e\n\u003cli\u003eAir dry and test conductivity with a multimeter\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eIf colour change or conductivity loss occurs, use \u003cstrong\u003edistilled, deionised, or reverse osmosis water only\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eOther conductive fabrics\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.tinkertailor.ca\/products\/breathable-mesh-silver-fibre-conductive-fabric-24-x-24cm\"\u003eBreathable Mesh Silver Fibre Conductive Fabric\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.tinkertailor.ca\/products\/soft-metallic-fabric\"\u003eSoft Metallic Fabric (nickel-copper-polyester)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.tinkertailor.ca\/products\/5-samples-conductive-fabric-dream-1\"\u003e5 Samples Conductive Fabric Dream\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Tinker Tailor","offers":[{"title":"10 x 10cm","offer_id":50068052443369,"sku":"SILVER-COTTON-10X10","price":4.95,"currency_code":"CAD","in_stock":true},{"title":"20 x 20cm","offer_id":50068052476137,"sku":"SILVER-COTTON-20X20","price":15.95,"currency_code":"CAD","in_stock":true},{"title":"30 x 30cm","offer_id":50068052508905,"sku":"SILVER-COTTON-30X30","price":34.75,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0790\/8006\/3209\/files\/5e5d8115-silvercotton3.jpg?v=1769271454"},{"product_id":"copper-conductive-fabric","title":"Copper Conductive Fabric","description":"\u003cp\u003eA soft, medium-weight copper-nickel woven fabric that's a pleasure to work with — easy to cut, sew, and iron-bond into your e-textile projects. Use it to make custom touch buttons, soft circuit traces, or EMI\/RF shielding in any shape you need.\u003c\/p\u003e\n\n\u003cp\u003eAvailable in four sizes so you can start small or go big:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e10 × 10cm\u003c\/strong\u003e — sample size, great for trying it out\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20 × 20cm\u003c\/strong\u003e — equivalent to 4 sample pieces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e30 × 30cm\u003c\/strong\u003e — large piece for bigger projects\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e28 × 100cm\u003c\/strong\u003e — long length for traces along an arm, leg, or around the body\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eTip: pair with \u003cstrong\u003eBond-a-web double-sided interfacing\u003c\/strong\u003e to iron the fabric in place before sewing for clean, precise placement.\u003c\/p\u003e\n\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Copper + Nickel blend\u003c\/li\u003e\n\u003cli\u003eThickness: 0.06mm\u003c\/li\u003e\n\u003cli\u003eFinish: Soft, slightly stiff medium-weight woven\u003c\/li\u003e\n\u003cli\u003eEMI\/RF shielding capable\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCare notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDo not scrub or rub\u003c\/li\u003e\n\u003cli\u003eIron on medium heat — do not leave iron in place for extended periods\u003c\/li\u003e\n\u003cli\u003eSome copper discolouration may occur over time or with outdoor use\u003c\/li\u003e\n\u003cli\u003e28 × 100cm size ships folded; all other sizes ship flat\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eRelated conductive fabrics\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.tinkertailor.ca\/products\/nickel-conductive-fabric-diamond-ripstop\"\u003eNickel Conductive Fabric – Diamond Ripstop\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.tinkertailor.ca\/products\/ripstop-conductive-fabric-square-pattern\"\u003eRipstop Conductive Fabric – Square Pattern\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.tinkertailor.ca\/products\/5-samples-conductive-fabric-dream-1\"\u003e5 Samples Conductive Fabric Dream\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Tinker Tailor","offers":[{"title":"10 x 10cm Sample","offer_id":50068058472681,"sku":"COPPER-FABRIC-10X10","price":4.95,"currency_code":"CAD","in_stock":true},{"title":"20 x 20cm Medium","offer_id":50068058505449,"sku":"COPPER-FABRIC-20X20","price":7.95,"currency_code":"CAD","in_stock":true},{"title":"28 x 100cm Large length","offer_id":50068058538217,"sku":"COPPER-FABRIC-28X100","price":38.75,"currency_code":"CAD","in_stock":false},{"title":"30 x 30cm Large","offer_id":50068058570985,"sku":"COPPER-FABRIC-30X30","price":19.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0790\/8006\/3209\/files\/51287198-20220429_091432.jpg?v=1769702345"},{"product_id":"open-universal-input-sleeve-ouis","title":"Open Universal Input Sleeve: OUIS","description":"\u003cp\u003eAdd stylish, fabric-based \u003cstrong\u003etouch input\u003c\/strong\u003e to any electronics project with the \u003cstrong\u003eOpen Universal Input Sleeve (OUIS)\u003c\/strong\u003e — an original Tinker Tailor design featured on \u003ca href=\"https:\/\/blog.adafruit.com\/2022\/08\/24\/touch-wearables-the-open-universal-input-sleeve-ouis\/\" target=\"_blank\"\u003eAdafruit Wearable Wednesdays\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003cp\u003eThe sleeve uses \u003cstrong\u003econductive fabric strips\u003c\/strong\u003e as touch pads, connected to your microcontroller via crocodile clips or silicone wire. Native touch works out of the box on ESP32; for Arduino-based boards, use the \u003ca href=\"https:\/\/github.com\/martin2250\/ADCTouch\" target=\"_blank\"\u003eADCTouch library\u003c\/a\u003e. Once you've built the basic version, the design is infinitely modifiable — more touch zones, different fabrics, Bluetooth integration, gesture recognition.\u003c\/p\u003e\n\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/wlcoqMrmLYQ?si=nosHvCI29-Dy74k0\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoice of microcontroller:\u003c\/strong\u003e None (use your own) \/ ESP32 30-pin \/ Circuit Playground Express (pre-programmed optional)\u003c\/li\u003e\n\u003cli\u003e8 strips of mixed conductive fabrics\u003c\/li\u003e\n\u003cli\u003eCrocodile\/alligator clips\u003c\/li\u003e\n\u003cli\u003eNeoprene fabric for the sleeve (grey, deep red, dark grey, or black — random; leave a note at checkout if you have a preference)\u003c\/li\u003e\n\u003cli\u003eSilicone wires (8 lengths)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eYou'll also need\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBasic sewing materials (needle, thread, scissors)\u003c\/li\u003e\n\u003cli\u003eThe full tutorial is on \u003ca href=\"https:\/\/www.instructables.com\/Touch-Me-Open-Universal-Input-Sleeve-OUIS\/\" target=\"_blank\"\u003eInstructables\u003c\/a\u003e — a PDF cutting guide is included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eRelated products\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWant to take it further with live data? Try the \u003ca href=\"https:\/\/www.tinkertailor.ca\/products\/esp32-connecting-touch-wearable-with-live-data\"\u003eESP32 Connecting – Touch Wearable with Live Data\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eNew to wearable electronics? Start with the \u003ca href=\"https:\/\/www.tinkertailor.ca\/products\/busy-new-bee\"\u003eBusy New Bee Starter Kit\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eNeed a standalone Circuit Playground? See the \u003ca href=\"https:\/\/www.tinkertailor.ca\/products\/adafruit-circuit-playground-classic\"\u003eAdafruit Circuit Playground Classic\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Tinker Tailor","offers":[{"title":"None","offer_id":50068060340457,"sku":"OUIS-NONE","price":21.99,"currency_code":"CAD","in_stock":true},{"title":"ESP32","offer_id":50068060274921,"sku":"OUIS-ESP32","price":33.99,"currency_code":"CAD","in_stock":true},{"title":"Circuit Playground","offer_id":50068060242153,"sku":"OUIS-CIRCUIT-PLAYGROUND","price":58.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0790\/8006\/3209\/files\/IMG_6427.jpg?v=1784556111"},{"product_id":"gutermann-vintage-tin-thread-set-1","title":"Gutermann Vintage Tin Thread set","description":"\u003cp\u003eA lovely storage box with a nostalgic advertising design, containing \u003cstrong\u003e8 × 100 m reels\u003c\/strong\u003e of Gütermann Sew-All Thread in bestselling classic shades. A great gift for sewists and makers alike — and the tin is worth keeping!\u003c\/p\u003e\n\u003cp\u003eI always use Gütermann threads for my projects because I won’t get breakage or fine threads in my machine mechanics. Great colours and such a cute box too!\u003c\/p\u003e\n\u003cp\u003eGütermann Sew-All is the right thread for all fabrics and seams, suitable for both machine and hand sewing. Manufactured using energy-efficient \u003cstrong\u003eMicro Core Technology®\u003c\/strong\u003e for consistent quality that is strong, tear-resistant, lint-free, soft, and smooth.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack:\u003c\/strong\u003e 8 reels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReel length:\u003c\/strong\u003e 100 m each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 100% polyester\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended needle:\u003c\/strong\u003e Universal NM 70–90\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBox size:\u003c\/strong\u003e 92 × 128 × 22 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAll materials and seams\u003c\/li\u003e\n\u003cli\u003eMachine and hand sewing\u003c\/li\u003e\n\u003cli\u003eLock stitch, step seams, overlock, and safety seams\u003c\/li\u003e\n\u003cli\u003eButtonholes and sewing on buttons\u003c\/li\u003e\n\u003cli\u003eFine ornamental stitches and decorative seams\u003c\/li\u003e\n\u003cli\u003eConductive fabric projects and wearable tech builds\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gutermann","offers":[{"title":"Default Title","offer_id":50076298576105,"sku":"GUTERMANN-TIN-CLASSIC-8PK","price":33.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0790\/8006\/3209\/files\/Gutermann8.png?v=1779735313"},{"product_id":"gutermann-vintage-tin-thread-set-bright-1","title":"Gutermann Vintage Tin Thread set: bright","description":"\u003cp\u003eA lovely storage box with a nostalgic advertising design, containing \u003cstrong\u003e8 × 100 m reels\u003c\/strong\u003e of Gütermann Sew-All Thread in bestselling bright shades. A great gift for sewists and makers alike — and the tin is worth keeping!\u003c\/p\u003e\n\u003cp\u003eGütermann Sew-All is the right thread for all fabrics and seams, suitable for both machine and hand sewing. Manufactured using energy-efficient \u003cstrong\u003eMicro Core Technology®\u003c\/strong\u003e for consistent quality that is strong, tear-resistant, lint-free, soft, and smooth.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack:\u003c\/strong\u003e 8 reels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReel length:\u003c\/strong\u003e 100 m each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 100% polyester\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended needle:\u003c\/strong\u003e Universal NM 70–90\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBox size:\u003c\/strong\u003e 92 × 128 × 22 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAll materials and seams\u003c\/li\u003e\n\u003cli\u003eMachine and hand sewing\u003c\/li\u003e\n\u003cli\u003eLock stitch, step seams, overlock, and safety seams\u003c\/li\u003e\n\u003cli\u003eButtonholes and sewing on buttons\u003c\/li\u003e\n\u003cli\u003eFine ornamental stitches and decorative seams\u003c\/li\u003e\n\u003cli\u003eConductive fabric projects and wearable tech builds\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Gutermann","offers":[{"title":"Default Title","offer_id":50076298707177,"sku":"GUTERMANN-TIN-BRIGHT-8PK","price":35.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0790\/8006\/3209\/files\/Gutermann.jpg?v=1779734663"},{"product_id":"sense-a-tional-fun-pack-1","title":"Sense-a-tional Experimenter Pack: 15 Sensors \u0026 Outputs","description":"\u003cp\u003eThis kit has enough supplies to make many different circuits! It’s a great experimenter’s kit with a huge variety of sensors and outputs — perfect for discovering what types of input and output you enjoy working with.\u003c\/p\u003e\n\u003cp\u003eJust add your favourite microcontroller (Gemma, Flora, Circuit Playground, or ESP32) and start prototyping wearables, robots, or interactive art.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eImages show components in project and prototyping situations for illustration purposes only — projects are not included.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eWhat’s Included\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eUltrasonic distance sensor\u003c\/li\u003e\n\u003cli\u003eKY-020 tilt sensor\u003c\/li\u003e\n\u003cli\u003eLEDs × 5 with resistors\u003c\/li\u003e\n\u003cli\u003eSound sensor\u003c\/li\u003e\n\u003cli\u003eHeart pulse sensor\u003c\/li\u003e\n\u003cli\u003eRFID reader \u0026amp; tags\u003c\/li\u003e\n\u003cli\u003eOLED display (random colour)\u003c\/li\u003e\n\u003cli\u003eRGB LED strip — 10 pixels, soldered\u003c\/li\u003e\n\u003cli\u003eFilament LED (random colour)\u003c\/li\u003e\n\u003cli\u003eServo motor\u003c\/li\u003e\n\u003cli\u003eCrocodile clips × 5 (assorted colours)\u003c\/li\u003e\n\u003cli\u003eHalf-size breadboard\u003c\/li\u003e\n\u003cli\u003ePrototyping wires with DuPont ends\u003c\/li\u003e\n\u003cli\u003eSilicone wires — 1 m × assorted colours\u003c\/li\u003e\n\u003cli\u003eHeader pins for soldering\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eWhat Could You Make?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUltrasonic sensor\u003c\/strong\u003e — a jacket that lights up when someone gets too close, a proximity alarm, or a distance-triggered animation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTilt sensor\u003c\/strong\u003e — a hat that changes colour when you nod, a tilt-activated sound effect, or a balance game\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSound sensor\u003c\/strong\u003e — sound-reactive NeoPixels that pulse to music, a clap-activated wearable, or a noise meter display\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeart pulse sensor\u003c\/strong\u003e — display your live heart rate on the OLED, trigger LEDs with your heartbeat, or build a biofeedback wearable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRFID reader\u003c\/strong\u003e — a secret unlock system, a tap-to-activate costume effect, or an interactive art installation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eServo motor\u003c\/strong\u003e — a wave-activated fin on a costume, a sensor-triggered mechanical element, or a tiny animatronic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeoPixel strip + OLED\u003c\/strong\u003e — a wearable weather display, a mood ring jacket, or a live data dashboard you wear\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Tinker Tailor","offers":[{"title":"Default Title","offer_id":50076298674409,"sku":"SENSE-A-TIONAL-PACK","price":49.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0790\/8006\/3209\/files\/ArduinoSensors.png?v=1779728174"},{"product_id":"kleiber-happy-life-sewing-kit-tin-70-pieces-1","title":"Kleiber Happy Life Sewing kit Tin 70 pieces","description":"\u003cp\u003eThis is a great looking kit with all the essentials to get you started — and it’s great to bring with you when you’re away! It also makes a wonderful gift for friends or family who sew, craft, or make.\u003c\/p\u003e\n\u003cp\u003eWe love tins! Great quality from Kleiber, a trusted German sewing brand.\u003c\/p\u003e\n\u003ch2\u003eWhat’s Included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOver 70 individual pieces\u003c\/li\u003e\n\u003cli\u003eScissors\u003c\/li\u003e\n\u003cli\u003eTweezers\u003c\/li\u003e\n\u003cli\u003eAssorted threads\u003c\/li\u003e\n\u003cli\u003eNeedles\u003c\/li\u003e\n\u003cli\u003eTape measure\u003c\/li\u003e\n\u003cli\u003eConvenient metal tin case — ideal for home or travel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA handy kit to keep at your workbench, in your bag, or tucked into a wearable tech project box. The tin keeps everything organized and protected between sessions.\u003c\/p\u003e","brand":"Kleiber","offers":[{"title":"Default Title","offer_id":50076300247273,"sku":"KLEIBER-SEWING-KIT-70","price":35.89,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0790\/8006\/3209\/files\/SewingKit.jpg?v=1779718192"},{"product_id":"busy-new-bee","title":"Busy New Bee (Electronics Starter Kit)","description":"\u003cp\u003eThis is an exciting field pack full of fun, simple circuits to make. This is for learning the basics — you’ll be able to create, make, and \u003cstrong\u003edo 8 different activities\u003c\/strong\u003e!\u003c\/p\u003e\n\u003cp\u003eThis pack \u003cstrong\u003econtains everything\u003c\/strong\u003e to help you get started with soft circuits, sewables, and basic concepts that you can build on.\u003c\/p\u003e\n\u003cp\u003eThese make \u003cstrong\u003egreat educational gifts\u003c\/strong\u003e too.\u003c\/p\u003e\n\u003ch2\u003eWhat’s Included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBattery holder × 3\u003c\/li\u003e\n\u003cli\u003eLEDs × 5\u003c\/li\u003e\n\u003cli\u003e220Ω \/ 330Ω resistors\u003c\/li\u003e\n\u003cli\u003eBreadboard\u003c\/li\u003e\n\u003cli\u003eHook-up wires — black, red, and assorted colours\u003c\/li\u003e\n\u003cli\u003eCrocodile clips × 5\u003c\/li\u003e\n\u003cli\u003e2-ply conductive thread — 5 m\u003c\/li\u003e\n\u003cli\u003eNeedles \u0026amp; needle threader\u003c\/li\u003e\n\u003cli\u003eFelt fabric — 8 × 10\" piece (various colours)\u003c\/li\u003e\n\u003cli\u003eSewable metal snaps\u003c\/li\u003e\n\u003cli\u003eVelostat square\u003c\/li\u003e\n\u003cli\u003eSewable LEDs × 3\u003c\/li\u003e\n\u003cli\u003eConductive fabric — 20 × 20 cm copper\u003c\/li\u003e\n\u003cli\u003eConductive fabric — 10 × 10 cm silver\u003c\/li\u003e\n\u003cli\u003eZipper\u003c\/li\u003e\n\u003cli\u003eLED filament\u003c\/li\u003e\n\u003cli\u003eCR2032 coin cell batteries × 3\u003c\/li\u003e\n\u003cli\u003ePDF instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eYou’ll Make\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\u003cstrong\u003eLED polarity test\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eA \u003cstrong\u003ebasic circuit with an LED\u003c\/strong\u003e using a breadboard and wires\u003c\/li\u003e\n\u003cli\u003eThe same circuit as a \u003cstrong\u003esoft circuit\u003c\/strong\u003e — sewn with LEDs\u003c\/li\u003e\n\u003cli\u003eA sewable circuit with \u003cstrong\u003esnaps as a switch\u003c\/strong\u003e and 3 sewable LEDs on felt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eButtons\/switches\u003c\/strong\u003e from conductive fabric and felt to control an LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVelostat as a switch\u003c\/strong\u003e to create an LED with varying brightness\u003c\/li\u003e\n\u003cli\u003eYour own \u003cstrong\u003ebattery holder\u003c\/strong\u003e from conductive fabric, thread, and felt\u003c\/li\u003e\n\u003cli\u003eA final larger project: a \u003cstrong\u003ezipper circuit to activate a filament LED\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003ePhew, that’s a lot of fun — you’ll keep busy!\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eNote: The colour of felt, zippers, and LEDs may vary from kit to kit.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eThis kit pairs beautifully with \u003ca href=\"https:\/\/www.tinkertailor.ca\/products\/the-ultimate-guide-to-informed-wearables\"\u003e\u003cstrong\u003eThe Ultimate Guide to Informed Wearables\u003c\/strong\u003e\u003c\/a\u003e (shown in images — not included with this pack).\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.dropbox.com\/scl\/fi\/fb64kwg079jk02u5elu2l\/BusyNewBeeGuide.pdf?rlkey=h8pa2bm0g1xyhjn7g6gfeg9bw\u0026amp;st=ci1ek061\u0026amp;dl=0\" target=\"_blank\"\u003eDownload the activity guide (PDF) \u003c\/a\u003e[External link as this file is ~20mb]\u003c\/p\u003e","brand":"Tinker Tailor","offers":[{"title":"Default Title","offer_id":50076301394153,"sku":"ELECTRONICS-STARTER-KIT","price":38.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0790\/8006\/3209\/files\/BusyNewBeeKit1.png?v=1779395317"},{"product_id":"esp32-connecting-touch-wearable-with-live-data","title":"ESP32 Connecting Kit: Touch Wearable with Live Weather Data","description":"\u003cp\u003eStay connected to loved ones across the globe with this heartfelt \u003cstrong\u003eFriends \u0026amp; Family\u003c\/strong\u003e weather display kit! Touch conductive fabric shapes representing distant locations — cities, hometowns, vacation spots — to instantly fetch and display live weather conditions on the OLED screen. Housed in a stylish 3D-printed pocket watch case, it’s emotional tech that brings faraway places and the people there closer with every tap.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0790\/8006\/3209\/files\/20220414_152705_-_Copy.jpg?v=1772978603\" alt=\"Friends and Family weather kit showing 3D-printed pocket watch housing with OLED display and conductive fabric location shapes\"\u003e\u003c\/p\u003e\n\u003cp\u003eThis is the \u003cstrong\u003eFriends \u0026amp; Family Pack\u003c\/strong\u003e — a project I created because I wanted to feel closer to people who are far away. We all have friends and family in other countries or places, and this project stemmed from that. It would be nice to check their location while you’re thinking of them.\u003c\/p\u003e\n\u003cp\u003eIt’s a fun intermediate project that connects to the internet to get \u003cstrong\u003elive weather data\u003c\/strong\u003e displayed on an \u003cstrong\u003eOLED screen\u003c\/strong\u003e. Conductive fabric shapes represent locations — when you \u003cstrong\u003etouch a shape\u003c\/strong\u003e, it checks the current weather at that location.\u003c\/p\u003e\n\u003cp\u003eYou’ll use an \u003cstrong\u003eESP32\u003c\/strong\u003e for Wi-Fi connectivity and capacitive touch sensing, with the result displayed on an \u003cstrong\u003eOLED display\u003c\/strong\u003e inside a 3D-printed pocket watch housing. Comes packed in a \u003cstrong\u003ereusable swish tin\u003c\/strong\u003e (silver \/ black \/ other).\u003c\/p\u003e\n\u003cp\u003eAlso see the book \u003ca href=\"https:\/\/www.tinkertailor.ca\/products\/the-ultimate-guide-to-informed-wearables\"\u003eThe Ultimate Guide to Informed Wearables\u003c\/a\u003e for more ESP32 project ideas.\u003c\/p\u003e\n\u003ch2\u003eWhat’s Included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eESP32 dev board\u003c\/li\u003e\n\u003cli\u003eOLED display\u003c\/li\u003e\n\u003cli\u003eVibration motor\u003c\/li\u003e\n\u003cli\u003eSilicone wire — 1 m × 4 colours\u003c\/li\u003e\n\u003cli\u003eConductive fabric (for making touch buttons\/shapes)\u003c\/li\u003e\n\u003cli\u003e3D-printed holder for the OLED\u003c\/li\u003e\n\u003cli\u003eInstructions \u0026amp; code\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eYou will need to provide your own \u003cstrong\u003ebattery source\u003c\/strong\u003e and \u003cstrong\u003econductive thread\u003c\/strong\u003e for sewing your location shapes into gloves, scarves, or wall hangings.\u003c\/p\u003e\n\u003cp\u003e⚠️To replicate this exact project you’ll also need a\u003cem\u003e free API account\u003c\/em\u003e for live weather data — a tutorial and starter code are included to get you going.\u003c\/p\u003e\n\u003cp\u003e👉🏻 There are 5 \u003cstrong\u003ecode examples\u003c\/strong\u003e for this project - as iterations before you complete the whole project. \u003ca href=\"https:\/\/github.com\/cmoz\/Ultimate\/tree\/main\/C7\"\u003ehttps:\/\/github.com\/cmoz\/Ultimate\/tree\/main\/C7\u003c\/a\u003e for this project's code examples.\u003c\/p\u003e","brand":"Tinker Tailor","offers":[{"title":"Default Title","offer_id":50076301918441,"sku":"TT-ESP32-TOUCH-KIT","price":34.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0790\/8006\/3209\/files\/connectingTouch.png?v=1779393793"},{"product_id":"pressure-pack-1","title":"Pressure Pack \u0026 Servo","description":"\u003cp\u003eMake and use your own \u003cstrong\u003epressure sensors\u003c\/strong\u003e to control a \u003cstrong\u003eservo\u003c\/strong\u003e and \u003cstrong\u003eLED brightness\u003c\/strong\u003e. ⭐\u003c\/p\u003e\n\u003cp\u003eThis kit contains supplies to make 4 or 5 sensors, depending on their size and shape. You’ll have conductive fabric and felt left over too!\u003c\/p\u003e\n\u003cp\u003eMake a sensor in any shape you want — sew them into a sock on the heel for pressure when walking, into a back jeans pocket for pressure when sitting, and a lot more!\u003c\/p\u003e\n\u003cp\u003eYou’ll be able to use a \u003cstrong\u003epressure sensor\u003c\/strong\u003e to control \u003cstrong\u003eservo\u003c\/strong\u003e movement and \u003cstrong\u003elight an LED\u003c\/strong\u003e with altering brightness. This project is also featured in \u003ca href=\"https:\/\/www.tinkertailor.ca\/products\/the-ultimate-guide-to-informed-wearables\"\u003eThe Ultimate Guide to Informed Wearables\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eAlso check out the \u003ca href=\"https:\/\/www.tinkertailor.ca\/products\/hex-field-pack\"\u003eHEX Field Pack\u003c\/a\u003e and \u003ca href=\"https:\/\/www.tinkertailor.ca\/products\/hattie-field-pack\"\u003eHattie Field Pack\u003c\/a\u003e for more intermediate wearable kits.\u003c\/p\u003e\n\u003ch2\u003eWhat’s Included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.tinkertailor.ca\/products\/adafruit-gemma-m0-sewable-microcontroller\"\u003eGemma M0\u003c\/a\u003e sewable microcontroller\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.tinkertailor.ca\/products\/velostat-10-x-20cm\"\u003eVelostat\u003c\/a\u003e 15 × 9 cm (may vary)\u003c\/li\u003e\n\u003cli\u003eConductive fabric 210 × 210 mm\u003c\/li\u003e\n\u003cli\u003eConductive thread 7 m\u003c\/li\u003e\n\u003cli\u003eFelt 9\" × 12\" piece (colour will vary: thistle, teal, silver, purple)\u003c\/li\u003e\n\u003cli\u003eNeedle \/ Threader \/ Thread\u003c\/li\u003e\n\u003cli\u003eLEDs × 5 + resistors\u003c\/li\u003e\n\u003cli\u003eServo motor 180°\u003c\/li\u003e\n\u003cli\u003eResistors 10K × 5\u003c\/li\u003e\n\u003cli\u003eInstructions as PDF \u0026amp; code\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe LEDs will be various colours, and the felt colour may differ from what’s pictured.\u003c\/p\u003e\n\u003ch2\u003eCode\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/cmoz\/Ultimate\/tree\/main\/C4\/C4_LEDFlexMadeSensor\" target=\"_blank\"\u003eLED Flex Made Sensor (GitHub)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/cmoz\/Ultimate\/tree\/main\/C4\/C4_GemmaFlexServo\" target=\"_blank\"\u003eGemma Flex Servo (GitHub)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Tinker Tailor","offers":[{"title":"Default Title","offer_id":50076302246121,"sku":"TT-PRESSURE-PACK-KIT","price":34.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0790\/8006\/3209\/files\/PRessurePack.jpg?v=1779385508"},{"product_id":"hex-field-pack","title":"HEX Field Pack","description":"\u003cp\u003e\u003cb\u003eSave ~10%\u003c\/b\u003e+ off as a kit!\u003c\/p\u003e\n\u003cp\u003eMake your own computer glove to give you HEX codes for any item around you! \u003cstrong\u003eSend the HEX code straight to your computer.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003ca href=\"https:\/\/www.instructables.com\/Designers-Dream-Hex-Codes-to-Computer\/\" target=\"_blank\"\u003eInstructable here\u003c\/a\u003e\u003c\/strong\u003e for code \u0026amp; how to build this project!\u003c\/p\u003e\n\u003cp\u003eThis is a great kit to practice your wearable skills and make a project you’ll use time and time again. This is an \u003cem\u003eintermediate\u003c\/em\u003e kit. We recommend looking at the Instructable first so you know what this build requires in terms of skills.\u003c\/p\u003e\n\u003cp\u003eThe video shows a version of this glove with a round colour area.\u003c\/p\u003e\n\u003cp\u003eI’ve used a \u003cstrong\u003eFlora\u003c\/strong\u003e board in this circuit. It also has a colour sensor that senses colours, then sends them to RGB pixels to display a closeness to that colour — and displays the HEX code on an \u003cstrong\u003eOLED display\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eCode is uploaded for both Flora and Circuit Playground variants (there are a couple of differences because of the pixels).\u003c\/p\u003e\n\u003cp\u003eAlso check out the \u003ca href=\"https:\/\/www.tinkertailor.ca\/products\/hattie-field-pack\"\u003eHattie Field Pack\u003c\/a\u003e for another intermediate wearable kit, and \u003ca href=\"https:\/\/www.tinkertailor.ca\/products\/the-ultimate-guide-to-informed-wearables\"\u003eThe Ultimate Guide to Informed Wearables\u003c\/a\u003e for more project ideas and tutorials.\u003c\/p\u003e\n\u003ch2\u003eWhat’s Included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour sensor \u003c\/strong\u003e(black or purple version)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOLED 0.96\" \u003c\/strong\u003eblue or white I2C display (random but \u003cem\u003ewrite preference at checkout\u003c\/em\u003e)\u003c\/li\u003e\n\u003cli\u003eSoft \u003cstrong\u003esilicone wire\u003c\/strong\u003e — 4 colours ×\u003cstrong\u003e 1 m each\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConductive fabric\u003c\/strong\u003e 10×10 cm (for making a button, random type) \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeoprene \u003c\/strong\u003eto make the glove (random colour: silver, black, wine, teal, grey, etc. \u003cem\u003ewrite your preference if you have one at checkout\u003c\/em\u003e)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeedle \/ Thread \/ Threader \u003c\/strong\u003e(\u003cem\u003enote: Prym Ready-to-Sew Needles as shown in image — no longer shipping\u003c\/em\u003e)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWS2812 RGB \u003c\/strong\u003ecolour LED grid (16-pixel pattern - SQUARE or CIRCLE, \u003cem\u003eyou can let me know your preference at checkout\u003c\/em\u003e)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThen use your own circuit board or decide on a Circuit board of your choice (see variants)\u003c\/p\u003e\n\u003cp\u003e⚠️ Note: Basic soldering skills are required to complete this project.\u003c\/p\u003e\n\u003cp\u003e✔️ Warning — it’s a super fun project that will have all your friends talking!\u003c\/p\u003e\n\u003ch3\u003eCODE FOR THIS PROJECT\u003c\/h3\u003e\n\u003cp\u003eHere is the final code. It's also available on GitHub in case there are revisions.\u003c\/p\u003e\n\u003cp\u003eFor all boards, including Flora:\u003cspan\u003e \u003c\/span\u003e\u003ca rel=\"nofollow noopener noreferrer\" href=\"https:\/\/github.com\/cmoz\/instructables\/tree\/main\/HandHEX_AllBoards\"\u003ehttps:\/\/github.com\/cmoz\/instructables\/tree\/main\/HandHEX_AllBoards\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eFor Circuit Playground:\u003cspan\u003e \u003c\/span\u003e\u003ca rel=\"nofollow noopener noreferrer\" href=\"https:\/\/github.com\/cmoz\/instructables\/blob\/main\/HandHEX_CP\/HandHEX_CP.ino\"\u003ehttps:\/\/github.com\/cmoz\/instructables\/blob\/main\/HandHEX_CP\/HandHEX_CP.ino\u003c\/a\u003e\u003c\/p\u003e","brand":"Tinker Tailor","offers":[{"title":"None Included","offer_id":50076412674281,"sku":"FP062","price":29.99,"currency_code":"CAD","in_stock":true},{"title":"Flora V3","offer_id":50076412707049,"sku":"FP060","price":45.99,"currency_code":"CAD","in_stock":true},{"title":"Circuit Playground","offer_id":50076412739817,"sku":"FP061","price":57.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0790\/8006\/3209\/files\/HEXField.png?v=1779379159"},{"product_id":"adafruit-circuit-playground-express","title":"Adafruit Circuit Playground Express","description":"\u003cp\u003eThis is an amazing starter board. Packed full of sensors, it’s easy to get up and running! I’ve used it for many projects and love it — it’s a great starter board and you can create fun wearables with it.\u003c\/p\u003e\n\u003cp\u003eI’ve made a \u003cstrong\u003ehat with temperature sensing\u003c\/strong\u003e, servo-moving axial fan, and UV light sensor readings.\u003c\/p\u003e\n\u003cp\u003eI’ve also made a ‘\u003cstrong\u003etouch together\u003c\/strong\u003e’ project — you can learn how to make that and others in \u003ca href=\"https:\/\/www.tinkertailor.ca\/products\/the-ultimate-guide-to-informed-wearables\"\u003e\u003cstrong\u003eThe Ultimate Guide to Informed Wearables\u003c\/strong\u003e\u003c\/a\u003e — that plays music when two people wear sleeves and touch their arms together. It uses conductive fabrics with the Circuit Playground’s capacitive touch pads.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Open Universal Input Sleeve showing conductive fabric touch project with Circuit Playground Express\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0790\/8006\/3209\/files\/d9f940c8-conductive43.webp?v=1769271461\"\u003e\u003c\/p\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eCircuit Playground Express\u003c\/strong\u003e is the next step towards a perfect introduction to electronics and programming. We’ve taken the original \u003ca href=\"https:\/\/www.tinkertailor.ca\/products\/adafruit-circuit-playground-classic\"\u003eCircuit Playground Classic\u003c\/a\u003e and made it even better — not only did we pack in even more sensors, we also made it even easier to program.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/VN8haRtufno?si=sSyFEaTmSiqtWrCA\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eStart your journey with \u003ca href=\"https:\/\/learn.adafruit.com\/makecode\"\u003e\u003cstrong\u003eMicrosoft MakeCode\u003c\/strong\u003e block-based or JavaScript programming\u003c\/a\u003e. Then use the same board to try \u003cstrong\u003eCircuitPython\u003c\/strong\u003e, with the Python interpreter running right on the Express. As you progress, advance to \u003cstrong\u003eArduino IDE\u003c\/strong\u003e, which has full support of all the hardware down to the low level. You can even use \u003cstrong\u003eCode.org CS Discoveries\u003c\/strong\u003e to learn all about coding right in your browser!\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-circuit-playground-express\"\u003e\u003cstrong\u003eCheck out Adafruit’s detailed guide with a tour of Circuit Playground Express and details on getting started using MakeCode, CircuitPython, Code.org CS Discoveries or Arduino!\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eBecause you can program the same board in 4 different ways, the Express has great value and re-usability. From beginners to experts, Circuit Playground Express has something for everyone.\u003c\/p\u003e\n\u003cp\u003eThe board is round and has alligator-clip pads around it so you don’t have to solder or sew to make it work. You can power it from USB, a AAA battery pack, or a LiPoly battery (for advanced users). Built-in USB means you plug it in to program it and it just shows up — no special cable or adapter required.\u003c\/p\u003e\n\u003ch2\u003eWhat’s Built In\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e10 × mini NeoPixels, each one can display any colour\u003c\/li\u003e\n\u003cli\u003e1 × Motion sensor (LIS3DH triple-axis accelerometer with tap \u0026amp; free-fall detection)\u003c\/li\u003e\n\u003cli\u003e1 × Temperature sensor (thermistor)\u003c\/li\u003e\n\u003cli\u003e1 × Light sensor (phototransistor) — can also act as colour sensor and pulse sensor\u003c\/li\u003e\n\u003cli\u003e1 × Sound sensor (MEMS microphone)\u003c\/li\u003e\n\u003cli\u003e1 × Mini speaker with class D amplifier (7.5 mm magnetic speaker\/buzzer)\u003c\/li\u003e\n\u003cli\u003e2 × Push buttons, labelled A and B\u003c\/li\u003e\n\u003cli\u003e1 × Slide switch\u003c\/li\u003e\n\u003cli\u003eInfrared receiver and transmitter — can receive\/transmit remote control codes and send messages between Circuit Playground Expresses; can also act as proximity sensor\u003c\/li\u003e\n\u003cli\u003e8 × alligator-clip friendly I\/O pins (I2C, UART, 8 analog inputs, multiple PWM outputs)\u003c\/li\u003e\n\u003cli\u003e7 pads as capacitive touch inputs + 1 true analog output\u003c\/li\u003e\n\u003cli\u003eGreen “ON” LED and red “#13” LED for basic blinking\u003c\/li\u003e\n\u003cli\u003eReset button\u003c\/li\u003e\n\u003cli\u003eATSAMD21 ARM Cortex M0 processor @ 3.3 V \/ 48 MHz\u003c\/li\u003e\n\u003cli\u003e2 MB SPI Flash storage (primarily for CircuitPython code and libraries)\u003c\/li\u003e\n\u003cli\u003eMicroUSB port for programming and debugging (can act as serial port, keyboard, mouse, joystick, or MIDI)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":50078241325289,"sku":"ADAFRUIT-CPX","price":39.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0790\/8006\/3209\/files\/CPX1.jpg?v=1769632590"},{"product_id":"shieldex®-bern","title":"Premium Shieldex® Bern","description":"\u003cp\u003eThis is part of our premium range of conductive fabrics! The look is very artistic, and with the quality of fabric, it will add style to your fashion technology projects.\u003c\/p\u003e\n\u003cp\u003eShieldex® Bern is a lightweight, non-woven silver-plated fabric engineered for superior electrical conductivity and EMI shielding. This unique conductive textile features a non-woven structure that makes it exceptionally soft, flexible, and easy to work with — ideal for wearable electronics, e-textiles, and electromagnetic shielding applications where comfort and performance are essential.\u003c\/p\u003e\n\u003cp\u003eUnlike traditional woven conductive fabrics, Shieldex® Bern features a non-woven construction that provides a softer hand feel and more uniform conductivity across the entire surface. The silver-plated fibres create a highly conductive network that’s perfect for applications requiring gentle skin contact, such as medical electrodes, biometric sensors, and comfortable wearable devices.\u003c\/p\u003e\n\u003cp\u003eAlso available in our Shieldex® range: \u003ca href=\"https:\/\/www.tinkertailor.ca\/products\/shieldex-balingen\"\u003eShieldex® Balingen\u003c\/a\u003e and \u003ca href=\"https:\/\/www.tinkertailor.ca\/products\/shieldex-bonn\"\u003eShieldex® Bonn\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNon-woven construction for superior softness\u003c\/li\u003e\n\u003cli\u003eExcellent electrical conductivity with uniform surface resistance\u003c\/li\u003e\n\u003cli\u003eSilver-plated for durability and antimicrobial properties\u003c\/li\u003e\n\u003cli\u003eLightweight and breathable\u003c\/li\u003e\n\u003cli\u003eExcellent EMI\/RFI shielding effectiveness\u003c\/li\u003e\n\u003cli\u003eSoft and comfortable against skin\u003c\/li\u003e\n\u003cli\u003eEasy to cut, sew, and integrate\u003c\/li\u003e\n\u003cli\u003eWashable and long-lasting\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCommon Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMedical ECG and EEG electrodes\u003c\/li\u003e\n\u003cli\u003eBiometric sensor pads\u003c\/li\u003e\n\u003cli\u003eComfortable wearable health monitors\u003c\/li\u003e\n\u003cli\u003eEMI\/EMF shielding in garments\u003c\/li\u003e\n\u003cli\u003eGrounding pads and straps\u003c\/li\u003e\n\u003cli\u003eSoft circuit pathways in e-textiles\u003c\/li\u003e\n\u003cli\u003eTENS unit electrodes\u003c\/li\u003e\n\u003cli\u003eSleep monitoring devices\u003c\/li\u003e\n\u003cli\u003eGentle touch-sensitive interfaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Silver-plated non-woven fabric\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface resistivity:\u003c\/strong\u003e \u0026lt;1 Ω\/sq (typical)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLightweight and breathable structure\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWashable:\u003c\/strong\u003e Up to 30°C\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAntimicrobial silver coating\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBiocompatible and skin-safe\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Shieldex","offers":[{"title":"10 x 10cm Sample","offer_id":50471065223401,"sku":"SHIELDEX-BERN","price":4.95,"currency_code":"CAD","in_stock":true},{"title":"20 x 20cm","offer_id":50471065256169,"sku":"SHIELDEX-BERN1","price":23.95,"currency_code":"CAD","in_stock":true},{"title":"20in x 20in","offer_id":51127521411305,"sku":"SHIELDEX-BERN2","price":85.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0790\/8006\/3209\/files\/Bern.webp?v=1771698889"},{"product_id":"shieldex®-bonn","title":"Premium Shieldex® Bonn","description":"\u003cp\u003ePart of our premium conductive fabric range. Shieldex® Bonn is a \u003cstrong\u003ethermally bonded nonwoven\u003c\/strong\u003e — think of it as a fine technical felt, silver-plated throughout. It's soft, lightweight, drapes beautifully, and because it's a nonwoven it \u003cstrong\u003ecuts cleanly without fraying\u003c\/strong\u003e — no hemming, no unravelling edges, just scissor-and-go shapes for your soft circuits.\u003c\/p\u003e\n\u003ch3\u003eSpecs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThermally bonded polyamide nonwoven, silver-plated (approx. 17% silver content)\u003c\/li\u003e\n\u003cli\u003eHighly conductive: surface resistivity under 0.5 Ω per square\u003c\/li\u003e\n\u003cli\u003eShields electromagnetic radiation (EMI\/RFI) and dissipates static\u003c\/li\u003e\n\u003cli\u003eAntimicrobial thanks to the silver\u003c\/li\u003e\n\u003cli\u003eSewable with conductive or regular thread\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eIdeal for\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClean-cut conductive shapes and touch pads — no fray means crisp edges straight off the scissors\u003c\/li\u003e\n\u003cli\u003eSensor projects, including body-contact and medical-style electrode experiments\u003c\/li\u003e\n\u003cli\u003eEMI shielding layers and static dissipation in enclosures and garments\u003c\/li\u003e\n\u003cli\u003ePrototyping soft circuits where you want conductivity in a soft, felt-like hand\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThis is not a stretch fabric.\u003c\/strong\u003e As a bonded nonwoven, Bonn holds its shape rather than stretching. If your project needs conductivity that moves with the body, choose our \u003ca href=\"https:\/\/www.tinkertailor.ca\/products\/woven-stretch-silver-conductive-fabric-1\"\u003eWoven Stretch Silver Conductive Fabric\u003c\/a\u003e instead.\u003c\/li\u003e\n\u003cli\u003eLike felt, nonwovens can pull apart under strong tension — treat it as a circuit and shielding material, not a structural one.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Shieldex","offers":[{"title":"10 x 10cm Sample","offer_id":50471049756905,"sku":"SHIELDEX-BONN","price":4.95,"currency_code":"CAD","in_stock":true},{"title":"20 x 20 cm","offer_id":50471049789673,"sku":"SHIELDEX-BONN1","price":23.95,"currency_code":"CAD","in_stock":true},{"title":"20in x 20in","offer_id":51127522853097,"sku":"SHIELDEX-BONN2","price":84.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0790\/8006\/3209\/files\/Bonn.webp?v=1771699056"},{"product_id":"shieldex®-balingen","title":"Premium Shieldex® Balingen","description":"\u003cp\u003eThis is a premium, high-quality conductive fabric, gently 'ribbed' in appearance. I would recommend you create your prototype with a basic conductive fabric, and then upgrade to use this in your completed projects. It is such a lush yet delicate feeling fabric, yet it is durable and strong!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShieldex® Balingen – Premium Conductive Fabric\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eShieldex® Balingen is a premium silver-plated nylon fabric engineered for superior electrical conductivity and electromagnetic shielding. This professional-grade conductive textile is perfect for wearable electronics, e-textiles, EMI\/RFI shielding applications, and smart garment prototyping.\u003c\/p\u003e\n\u003cp\u003eThe fabric features a durable nylon base with a silver-plated coating that provides excellent electrical conductivity while remaining soft, flexible, and comfortable against skin. Unlike cheaper alternatives, Shieldex® maintains consistent conductivity even after repeated washing and wear.\u003c\/p\u003e\n\u003cp\u003eAlso available in our Shieldex® range: \u003ca href=\"https:\/\/www.tinkertailor.ca\/products\/premium-shieldex-bonn\"\u003eShieldex® Bonn\u003c\/a\u003e and \u003ca href=\"https:\/\/www.tinkertailor.ca\/products\/premium-shieldex-bern\"\u003eShieldex® Bern\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHigh electrical conductivity with low surface resistance\u003c\/li\u003e\n\u003cli\u003eExcellent EMI\/RFI shielding effectiveness (\u0026gt;55 dB)\u003c\/li\u003e\n\u003cli\u003eSoft, flexible, and drapeable for comfortable wearables\u003c\/li\u003e\n\u003cli\u003eWashable and durable silver-plated coating\u003c\/li\u003e\n\u003cli\u003eCan be sewn, cut, and integrated into garments\u003c\/li\u003e\n\u003cli\u003eBiocompatible and skin-safe\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCommon Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWearable sensor electrodes and contact pads\u003c\/li\u003e\n\u003cli\u003eSmart clothing and e-textile projects\u003c\/li\u003e\n\u003cli\u003eEMI\/EMF shielding garments\u003c\/li\u003e\n\u003cli\u003eCapacitive touch interfaces\u003c\/li\u003e\n\u003cli\u003eGrounding straps and conductive pathways\u003c\/li\u003e\n\u003cli\u003eMedical and health monitoring devices\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDescription:\u003c\/strong\u003e Silver-plated knitted fabric\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRaw material:\u003c\/strong\u003e 100% Polyamide\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlating:\u003c\/strong\u003e 99% pure Silver (~20% silver content)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurface Resistivity:\u003c\/strong\u003e \u0026lt; 0.6 Ω\/□\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation:\u003c\/strong\u003e Average \u0026gt; 55 dB from 300 MHz to 3 GHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Range:\u003c\/strong\u003e 30°C to 90°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 62 g\/m² ± 10%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal Thickness:\u003c\/strong\u003e 0.26 mm ± 10%\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCompliance \u0026amp; Certification\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRoHS\u003c\/li\u003e\n\u003cli\u003eREACH\u003c\/li\u003e\n\u003cli\u003eÖko-Tex® Standard 100\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSilver is a biocidal active substance according to Section 67 of the EU Biocide Regulation.\u003c\/p\u003e","brand":"Shieldex","offers":[{"title":"10 x 10cm Sample","offer_id":50471043072233,"sku":"BALINGEN-CONDUCTIVE-FABRIC","price":6.95,"currency_code":"CAD","in_stock":true},{"title":"20 x 20cm","offer_id":50471043105001,"sku":"BALINGEN-CONDUCTIVE-FABRIC-LG","price":32.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0790\/8006\/3209\/files\/Balingen.webp?v=1771699949"},{"product_id":"tinker-tailor-gift-card","title":"Tinker Tailor Gift Card","description":"\u003cp\u003eGive the gift of creativity.\u003c\/p\u003e\n\u003cp\u003eWhether they're dreaming up their next wearable project, stocking up on conductive fabrics, or diving into e-textile prototyping, a Tinker Tailor gift card lets them choose exactly what sparks their imagination.\u003c\/p\u003e\n\u003cp\u003ePerfect for makers, hobbyists, artists, students, and tech enthusiasts who love to build. Choose from our curated collection of conductive fabrics, microcontrollers, sensors, LEDs, tools, and specialty components — digital delivery makes it easy to send instantly or schedule for a special occasion!\u003c\/p\u003e","brand":"Tinker Tailor","offers":[{"title":"$10.00","offer_id":50472339046633,"sku":null,"price":10.0,"currency_code":"CAD","in_stock":true},{"title":"$25.00","offer_id":50472339079401,"sku":null,"price":25.0,"currency_code":"CAD","in_stock":true},{"title":"$50.00","offer_id":50472339112169,"sku":null,"price":50.0,"currency_code":"CAD","in_stock":true},{"title":"$100.00","offer_id":50472339144937,"sku":null,"price":100.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0790\/8006\/3209\/files\/put-gift-card-on-it-and-use-hobby-electronics.png?v=1771796093"},{"product_id":"esp32-oled-video-kit-everything-used-in-the-build","title":"ESP32 + OLED Video Kit — Everything Used in the Build","description":"\u003cp\u003e\u003cstrong\u003eEverything used in the video — in one box.\u003c\/strong\u003e This kit contains the exact components from my ESP32 + OLED tutorial, so you can follow along and have a working display in under 5 minutes, then hack it to show messages sent from your phone over WiFi.\u003c\/p\u003e\n\u003ch3\u003eWhat's in the kit\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × \u003ca href=\"https:\/\/www.tinkertailor.ca\/products\/esp32-development-board-usb-c\"\u003eESP32 Development Board, 38-pin (USB-C)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 × OLED 0.96\" display, 128×64, I2C (SSD1306) (display colour may vary — blue, white, yellow, or yellow\/blue two-tone. All work identically with the video code but a heads-up: pin order can differ between modules — the video shows you how to check).\u003c\/li\u003e\n\u003cli\u003e1 × Half-size solderless breadboard (400 tie points, white or clear)\u003c\/li\u003e\n\u003cli\u003e1 × Hookup wire sampler (8 x mixed)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBought separately: $34.88 — as a kit: save ~10%!\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eWhat you'll build\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWire an OLED to your ESP32 over I2C (just 4 wires — SDA, SCL, power, ground)\u003c\/li\u003e\n\u003cli\u003eRun graphics demos using the Adafruit SSD1306 + GFX libraries\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe advanced hack:\u003c\/strong\u003e connect over WiFi and type messages from your phone straight to the screen\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eYou'll also need\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eA USB-C data cable for programming — grab our \u003ca href=\"https:\/\/www.tinkertailor.ca\/products\/usb-c-data-cable-1\"\u003eUSB-C Data Cable (1m)\u003c\/a\u003e if you need one\u003c\/li\u003e\n\u003cli\u003eA computer with PlatformIO (VS Code) or Arduino IDE — both covered in the video\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Tinker Tailor","offers":[{"title":"Default Title","offer_id":51508419756265,"sku":"VIDEO-KIT-ESP32-OLED","price":31.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0790\/8006\/3209\/files\/easyOLED.webp?v=1783906743"},{"product_id":"rfid-esp32-video-kit-everything-used-in-the-build","title":"RFID + ESP32 Video Kit — Everything Used in the Build","description":"\u003cp\u003e\u003cstrong\u003eBring RFID to your projects — everything from the video in one box.\u003c\/strong\u003e Build a tag reader that recognizes specific cards, stickers, and keyfobs, with an OLED screen for instant feedback: scan a matching tag and get a heart, scan the wrong one and meet the dancing skeleton. Then make it yours — unlock effects, trigger lights, or build a secret access system into a wearable.\u003c\/p\u003e\n\u003ch3\u003eKit Facts\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDifficulty:\u003c\/strong\u003e Level 1 — Plug \u0026amp; Play\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoldering:\u003c\/strong\u003e None — solderless breadboard wiring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSewing:\u003c\/strong\u003e None\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou'll need:\u003c\/strong\u003e a USB-C data cable and a computer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the kit\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 × \u003ca href=\"https:\/\/www.tinkertailor.ca\/products\/esp32-development-board-30-pin-usb-c\"\u003eESP32 Development Board, 30-pin (USB-C)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 × \u003ca href=\"https:\/\/www.tinkertailor.ca\/products\/rfid-rc522-board-and-tags\"\u003eRFID-RC522 reader board with starter tags\u003c\/a\u003e (13.56MHz, SPI)\u003c\/li\u003e\n\u003cli\u003e1 × \u003ca href=\"https:\/\/www.tinkertailor.ca\/products\/rfid-tags-6\"\u003eColour RFID keyfob tags, 5 pack\u003c\/a\u003e — \u003cem\u003eassorted colours, may vary\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 × OLED 0.96\" display, 128×64, I2C (SSD1306) — \u003cem\u003edisplay colour may vary: blue, white, yellow, or yellow\/blue two-tone. All work identically with the video code\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 × Full-size solderless breadboard (830 tie points)\u003c\/li\u003e\n\u003cli\u003e1 × Various hook-up wires\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBought separately: $47.42 — as a kit: save ~10%!\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eWhat you'll build\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWire an RC522 RFID reader to your ESP32 over SPI, plus the OLED over I2C — full wiring walkthrough in the video\u003c\/li\u003e\n\u003cli\u003eRead the unique ID (UID) from every tag, card, or sticker you scan\u003c\/li\u003e\n\u003cli\u003eProgram tag-matching logic: recognized tags trigger one response, unknown tags another\u003c\/li\u003e\n\u003cli\u003eThen decide what you want your OLED screen to display!\u003c\/li\u003e\n\u003cli\u003eIdeas to take it further: access control for your workshop, tap-to-activate costume effects, interactive art, or hidden triggers sewn into clothing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eYou'll also need\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eA USB-C \u003cstrong\u003edata\u003c\/strong\u003e cable for programming (a charge-only cable won't work!) — our \u003ca href=\"https:\/\/www.tinkertailor.ca\/products\/usb-c-data-cable-1\"\u003eUSB-C Data Cable (1m)\u003c\/a\u003e is data-ready\u003c\/li\u003e\n\u003cli\u003eA computer with PlatformIO (VS Code) or Arduino IDE — both covered in the video\u003c\/li\u003e\n\u003cli\u003eThe MFRC522 library (free — installation shown in the video)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Tinker Tailor","offers":[{"title":"Default Title","offer_id":51508671283433,"sku":"VIDEO-KIT-RFID-ESP32","price":41.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0790\/8006\/3209\/files\/RFID-ESP.webp?v=1783909636"},{"product_id":"flight-glove-video-kit-everything-used-in-the-build","title":"Flight Glove Video Kit — Everything Used in the Build","description":"\u003cp\u003e\u003cstrong\u003eEverything used in the video — in one box.\u003c\/strong\u003e Build the Flight Glove: a wearable countdown timer that keeps you on schedule at the airport, with an OLED display, fabric touch buttons made from conductive fabric, WS2812B lights, and rechargeable power — all sewn onto soft neoprene. Follow along with the full video build and make your own.\u003c\/p\u003e\n\u003ch3\u003eKit Facts\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDifficulty:\u003c\/strong\u003e Level 3 — Wearable Build\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoldering:\u003c\/strong\u003e Yes — wire and board connections\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSewing:\u003c\/strong\u003e Yes — conductive thread circuitry and fabric touch buttons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou'll need:\u003c\/strong\u003e soldering iron, USB-C data cable, small LiPo battery, sewing needle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChoose your board\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eESP32-S3 SuperMini\u003c\/strong\u003e — our tiny black USB-C powerhouse, the budget-friendly pick. Updated code for the S3 will be linked in the video description.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQT Py ESP32-S2 (as filmed)\u003c\/strong\u003e — the same Adafruit board used in the video, so the video code runs as-is.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the kit\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eYour choice of board: \u003ca href=\"https:\/\/www.tinkertailor.ca\/products\/esp32-s3-supermini-development-board\"\u003eESP32-S3 SuperMini\u003c\/a\u003e or Adafruit QT Py ESP32-S2\u003c\/li\u003e\n\u003cli\u003e0.96\" OLED display (I2C, SSD1306) random colour\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.tinkertailor.ca\/products\/nibbles-dazzle-your-projects-with-mini-rgb-magic\"\u003eNIBBLES — mini WS2812B RGB LED module\u003c\/a\u003e (Tinker Tailor original)\u003c\/li\u003e\n\u003cli\u003eSewable slide switch\u003c\/li\u003e\n\u003cli\u003eSoft silicone wire, 24 AWG mixed sampler (1m lengths)\u003c\/li\u003e\n\u003cli\u003eSilver conductive fabric, ~14 × 14cm — for your fabric touch buttons\u003c\/li\u003e\n\u003cli\u003eElectro Loops (ring terminals, 15-pack)\u003c\/li\u003e\n\u003cli\u003eLithium battery charging board (USB-C)\u003c\/li\u003e\n\u003cli\u003eNeoprene base fabric, 25 × 30cm\u003c\/li\u003e\n\u003cli\u003eStainless steel 2-ply conductive thread, 25m\u003c\/li\u003e\n\u003cli\u003eNeedle \u0026amp; Needle Threader\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eColours may vary:\u003c\/strong\u003e the OLED may be yellow\/blue, white, blue, or yellow; the neoprene may be black, grey\/silver, teal, or wine; and the silver conductive fabric style may vary — all are equivalent for the build.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou'll need a USB-C data cable\u003c\/strong\u003e to program your board. Many USB-C cables are charge-only and will not work — if you're not sure, grab our \u003ca href=\"https:\/\/www.tinkertailor.ca\/products\/usb-c-data-cable-1\"\u003eUSB-C data cable\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Tinker Tailor","offers":[{"title":"ESP32-S3 SuperMini","offer_id":51514456277225,"sku":"VIDEO-KIT-FLIGHT-GLOVE-S3","price":48.95,"currency_code":"CAD","in_stock":true},{"title":"QT Py ESP32-S2","offer_id":51514456309993,"sku":"VIDEO-KIT-FLIGHT-GLOVE-QTPY","price":58.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0790\/8006\/3209\/files\/FilghtSaver.webp?v=1783913253"},{"product_id":"e-paper-to-do-list-video-kit-everything-used-in-the-build","title":"E-Paper To-Do List Video Kit — Everything Used in the Build","description":"\u003cp\u003e\u003cstrong\u003eEverything used in the video — in one box.\u003c\/strong\u003e Build the genius to-do list gadget: a WiFi-connected task list on a crisp, paper-like e-ink display that you can update straight from your phone. Ultra low power, so it holds your list even when it's off — sewn onto a soft neoprene base for a wearable or desk-side finish. Follow along with the full video build and make your own.\u003c\/p\u003e\n\u003ch3\u003eKit Facts\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDifficulty:\u003c\/strong\u003e Level 2 — Maker\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoldering:\u003c\/strong\u003e Yes — wire connections to the board and display\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSewing:\u003c\/strong\u003e Light — mounting to the neoprene base with conductive thread\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou'll need:\u003c\/strong\u003e soldering iron, USB-C data cable, small LiPo battery\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChoose your board\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eESP32-C3 SuperMini\u003c\/strong\u003e — our tiny black USB-C powerhouse. Exactly as filmed, but it is a black version. Comment in the cart area if you would like me to try to give you a pink one (limited). The video code runs as-is.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQT Py ESP32-S2\u003c\/strong\u003e — the Adafruit board that is small and often used in my video projects. Updated code for the QTPy will be linked in the video description.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg alt=\"epaper worn on wrist\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0790\/8006\/3209\/files\/ePaperWeAct.png?v=1779339543\"\u003e\u003c\/p\u003e\n\u003ch3\u003eWhat's in the kit\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eYour choice of board: \u003ca href=\"https:\/\/www.tinkertailor.ca\/products\/black-esp32-c3-supermini-development-board\"\u003eESP32-C3 SuperMini\u003c\/a\u003e or Adafruit QT Py ESP32-S2\u003c\/li\u003e\n\u003cli\u003eWeAct 2.13\" E-Paper Module (tri colour black \/ white \/ red)\u003c\/li\u003e\n\u003cli\u003eSewable slide switch\u003c\/li\u003e\n\u003cli\u003eSoft silicone wire, 24 AWG mixed sampler (1m lengths)\u003c\/li\u003e\n\u003cli\u003eElectro Loops (ring terminals, 15-pack)\u003c\/li\u003e\n\u003cli\u003eLithium battery charging board (USB-C)\u003c\/li\u003e\n\u003cli\u003eNeoprene base fabric, 30 × 20cm\u003c\/li\u003e\n\u003cli\u003eFelt piece (optional use - to map out your circuit\/prototype and sew items to that first)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.tinkertailor.ca\/products\/stainless-steel-2-ply-thread-25meters\"\u003eStainless steel 2-ply conductive thread\u003c\/a\u003e, 25m\u003c\/li\u003e\n\u003cli\u003eNeedle \u0026amp; Threader\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNeoprene colour may vary:\u003c\/strong\u003e black, grey\/silver, teal, or wine — all are equivalent for the build.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou'll need a USB-C data cable\u003c\/strong\u003e to program your board. Many USB-C cables are charge-only and will not work — if you're not sure, grab our \u003ca href=\"https:\/\/www.tinkertailor.ca\/products\/usb-c-data-cable-1\"\u003eUSB-C data cable\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003ePower source if charging \/ updating on the go.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAdditional help setting up your ePaper display? Check out this tutorial too: \u003ca href=\"https:\/\/youtu.be\/Ww5av-e-W50\"\u003ehttps:\/\/youtu.be\/Ww5av-e-W50\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eNote: I did add some lace to the cuff of this project, so it looks a little more like a bracelet. Have fun designing this to suit your style! \u003c\/p\u003e","brand":"Tinker Tailor","offers":[{"title":"ESP32-C3 SuperMini","offer_id":51512064639209,"sku":"VIDEO-KIT-EPAPER-TODO-C3","price":49.95,"currency_code":"CAD","in_stock":true},{"title":"QT Py ESP32-S2","offer_id":51512064671977,"sku":"VIDEO-KIT-EPAPER-TODO-QTPY","price":61.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0790\/8006\/3209\/files\/jeweleryWristePaper.png?v=1779339956"},{"product_id":"sparkle-lights-video-kit-everything-used-in-the-build","title":"Sparkle Lights Video Kit — Everything Used in the Build","description":"\u003cp\u003e\u003cstrong\u003eEverything used in the video — in one box, and nothing to solder.\u003c\/strong\u003e Add sparkle to your fashion tech: wire up two different WS2812B addressable LED modules to an ESP32 and bring them to life with FastLED animations. Every LED is individually controllable — chase, twinkle, fade, and glow — and everything in this kit arrives breadboard-ready so you can jump straight in.\u003c\/p\u003e\n\u003ch3\u003eKit Facts\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDifficulty:\u003c\/strong\u003e Level 1 — Plug \u0026amp; Play\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoldering:\u003c\/strong\u003e None — both LED modules and your board arrive hand-assembled and breadboard-ready\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSewing:\u003c\/strong\u003e None\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou'll need:\u003c\/strong\u003e a USB-C data cable and a computer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMake it pink\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eClassic Black\u003c\/strong\u003e — the standard 30-pin USB-C ESP32, headers pre-soldered.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePink (limited)\u003c\/strong\u003e — a limited-run pink ESP32 with gold detailing, built on the newer WROOM-32E module, headers hand-soldered by us just for this kit. When they're gone, they're gone.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the kit\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eESP32 Development Board, 30-pin (USB-C) — classic black or \u003cem\u003elimited \u003c\/em\u003epink\u003c\/li\u003e\n\u003cli\u003eNeo Tester — our 8-LED WS2812B strip, hand-soldered, heat-shrink protected, and tested in Nova Scotia\u003c\/li\u003e\n\u003cli\u003e8-Bit WS2812 RGB LED Ring — with header pins soldered by us, a kit exclusive (the ring ships bare when bought on its own)\u003c\/li\u003e\n\u003cli\u003eHalf-size solderless breadboard (400 tie points)\u003c\/li\u003e\n\u003cli\u003eHook-up wires for the circuit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBreadboard colour may vary:\u003c\/strong\u003e white or clear — both work identically.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou'll need a USB-C data cable\u003c\/strong\u003e to program the ESP32. Many USB-C cables are charge-only and will not work — if you're not sure, grab our \u003ca href=\"https:\/\/www.tinkertailor.ca\/products\/usb-c-data-cable-1\"\u003eUSB-C data cable\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eReady to go bigger after the build? Our sewable \u003ca href=\"https:\/\/www.tinkertailor.ca\/products\/rgb-pixels-ws281b-flex-strip\"\u003eWS2812B Flexible RGB LED Strip\u003c\/a\u003e uses the exact same code — the video shows you how to choose and cut strips.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e🖥️ The code from the video is free here: \u003ca href=\"https:\/\/gist.github.com\/cmoz\/f5fe2284752cfc2bd594f38dd40220cd\"\u003eFastLED example on GitHub\u003c\/a\u003e\u003c\/p\u003e","brand":"Tinker Tailor","offers":[{"title":"Classic Black","offer_id":51526255673577,"sku":"VIDEO-KIT-SPARKLE-WS2812-BLK","price":39.95,"currency_code":"CAD","in_stock":true},{"title":"Pink (limited)","offer_id":51526255706345,"sku":"VIDEO-KIT-SPARKLE-WS2812-PINK","price":43.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0790\/8006\/3209\/files\/Screenshot_2026-07-14_024455.png?v=1784007912"},{"product_id":"wearable-simon-game-video-kit-everything-used-in-the-build","title":"Wearable Simon Game Video Kit — Everything Used in the Build","description":"\u003cp\u003e\u003cstrong\u003eEverything used in the video — in one box.\u003c\/strong\u003e Build the Wearable Simon Game: a fabric memory game you can actually play on the go. Conductive fabric touch strips are your buttons, five addressable RGB LEDs flash the pattern (and show your score in binary!), and it all sews onto soft neoprene into a genuinely playable wearable. Watch the pattern, repeat it, and see how far you can get — the top score is 31.\u003c\/p\u003e\n\u003ch3\u003eKit Facts\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDifficulty:\u003c\/strong\u003e Level 3 — Wearable Build\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSoldering:\u003c\/strong\u003e Yes — the LED chips and wire connections\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSewing:\u003c\/strong\u003e Yes — conductive thread circuitry and fabric touch strips\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou'll need:\u003c\/strong\u003e soldering iron, USB-C data cable, small LiPo battery\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's in the kit\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eESP32 Development Board, 30-pin (USB-C)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.tinkertailor.ca\/products\/rgb-led-button-chip-addressable-1\"\u003eRGB LED Button Chips\u003c\/a\u003e, 5-pack — addressable WS2812B pixels for the game lights and binary score - sew or solder\u003c\/li\u003e\n\u003cli\u003eAn exclusive cut of striped conductive fabric for your touch strips — specially sourced, not available anywhere else (even in our shop)\u003c\/li\u003e\n\u003cli\u003eSewable slide switch\u003c\/li\u003e\n\u003cli\u003eSoft silicone wire, 24 AWG mixed sampler (1m lengths)\u003c\/li\u003e\n\u003cli\u003eElectro Loops (ring terminals, 15-pack)\u003c\/li\u003e\n\u003cli\u003eLithium battery charging board (USB-C)\u003c\/li\u003e\n\u003cli\u003eNeoprene base fabric, 30 × 20cm\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.tinkertailor.ca\/products\/stainless-steel-2-ply-thread-25meters\"\u003eStainless steel 2-ply conductive thread\u003c\/a\u003e, 25m\u003c\/li\u003e\n\u003cli\u003eSewing needle and needle threader\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe LED button chips are sewable LEDs\u003c\/strong\u003e — they can be soldered or used as sew tabs, exactly as used in the video. You can sew or solder thread\/wire between them to make the chain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColours may vary:\u003c\/strong\u003e the neoprene may be black, grey\/silver, teal, or wine, and the LED chip boards may be black or white PCB — all are equivalent for the build.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e⚠️You'll need a USB-C data cable\u003c\/strong\u003e to program the ESP32. Many USB-C cables are charge-only and will not work — if you're not sure, grab our \u003ca href=\"https:\/\/www.tinkertailor.ca\/products\/usb-c-data-cable-1\"\u003eUSB-C data cable\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e🖥️ Code for the build is free on GitHub: \u003ca href=\"https:\/\/github.com\/cmoz\/SimonMemoryWearableWoop\/tree\/main\"\u003egithub.com\/cmoz\/SimonMemoryWearableWoop\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eNOTE: This is a LIMITED kit - based on availability of the specialist 'zebra' conductive fabric so - when it's gone, it's gone! If we secure a reliable source, we will remove the limited-availability stock notice. \u003c\/p\u003e","brand":"Tinker Tailor","offers":[{"title":"Default Title","offer_id":51527175012585,"sku":"VIDEO-KIT-SIMON-GAME","price":49.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0790\/8006\/3209\/files\/IMG_6398.jpg?v=1784824561"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0790\/8006\/3209\/collections\/electronics-gift-package-30.png?v=1790714044","url":"https:\/\/www.tinkertailor.ca\/collections\/gifts-30-hero-items.oembed","provider":"Tinker Tailor","version":"1.0","type":"link"}