{"product_id":"mpr121-12-key-capacitive-touch-sensor","title":"MPR121 12-Key Capacitive Touch Sensor Board","description":"\u003cp\u003eTurn fabric into buttons (even when your microcontroller doesnt have native touch pins!). The \u003cstrong\u003eMPR121\u003c\/strong\u003e gives you \u003cstrong\u003e12 separate capacitive touch inputs\u003c\/strong\u003e over I2C. Connect each electrode to a patch of conductive fabric, a line of conductive thread, conductive paint or a piece of foil, and your project knows exactly which one is being touched.\u003c\/p\u003e\n\u003cp\u003eIt's a favourite for soft interfaces: embroidered keypads, touch-sensitive sleeves, musical garments, and interactive textiles. You can even detect touch through a thin layer of fabric, so the conductive parts can hide underneath. The chip handles filtering and calibration for you, so readings stay steady as the garment moves.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChip:\u003c\/strong\u003e NXP MPR121\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 12 capacitive touch \/ proximity electrodes (0–11)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterface:\u003c\/strong\u003e I2C — default address 0x5A (0x5B–0x5D selectable with ADD)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply voltage:\u003c\/strong\u003e 3.3V (check the silkscreen on your board)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterrupt:\u003c\/strong\u003e IRQ pin signals when a touch changes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLibraries:\u003c\/strong\u003e Adafruit_MPR121 (Arduino, ESP32, CircuitPython)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePin Definitions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.3V \/ VCC\u003c\/strong\u003e — Power in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGND\u003c\/strong\u003e — Ground\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSCL\u003c\/strong\u003e — I2C clock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSDA\u003c\/strong\u003e — I2C data\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIRQ\u003c\/strong\u003e — Interrupt output, goes LOW when a touch changes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eADD\u003c\/strong\u003e — I2C address select\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e0–11\u003c\/strong\u003e — Touch electrodes — connect to conductive fabric, thread, paint or foil\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProject Ideas\u003c\/h2\u003e\n\u003cp\u003eA 12-note musical jacket, an embroidered keypad on a sleeve, a touch-controlled handbag, a soft storybook with touch-triggered lights and sounds, or a stroke-sensitive textile artwork.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/_YED86Ze5Pg?si=nF7fnMB3ThwhtSQD\u0026amp;start=1266\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eGood to know\u003c\/h2\u003e\n\u003cp\u003eKeep electrode wires or thread traces short and apart from each other so they don't pick up each other's touches. After changing electrodes, reset or re-initialise the board so it recalibrates.\u003c\/p\u003e\n\u003ch2\u003ePair It With\u003c\/h2\u003e\n\u003cp\u003eMake your electrodes from \u003ca href=\"\/products\/durable-oxford-conductive-fabric\"\u003eDurable Oxford Conductive Fabric\u003c\/a\u003e or \u003ca href=\"\/products\/silver-woven-stretch-conductive-fabric-30x30\"\u003eSilver Woven Stretch Conductive Fabric\u003c\/a\u003e and connect them with \u003ca href=\"\/products\/stainless-steel-2-ply-thread-25meters\"\u003estainless steel conductive thread\u003c\/a\u003e. Add feedback with a \u003ca href=\"\/products\/mini-coin-vibration-motor-1027\"\u003ecoin vibration motor\u003c\/a\u003e or \u003ca href=\"\/products\/single-ws2812b-rgb-pixel-module\"\u003esingle WS2812B pixels\u003c\/a\u003e. For just a few buttons, the \u003ca href=\"\/products\/4-key-capacitive-touch-sensor\"\u003e4-Bit Capacitive Touch Sensor\u003c\/a\u003e is a simpler option.\u003c\/p\u003e\n\u003ch2\u003eIn the box\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMPR121 12-key capacitive touch board × 1\u003c\/li\u003e\n\u003cli\u003eHeader pins × 1 set\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Tinker Tailor","offers":[{"title":"Default Title","offer_id":51926788767977,"sku":"TT-MPR121","price":8.95,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0790\/8006\/3209\/files\/S765f8c6cfff14f2890176fcc50f52b94W.webp?v=1790182049","url":"https:\/\/www.tinkertailor.ca\/products\/mpr121-12-key-capacitive-touch-sensor","provider":"Tinker Tailor","version":"1.0","type":"link"}