Details
An onboard regulator and level shifting mean it works with both 3.3V and 5V boards. It has no lens cover, so it's a little more exposed than the TOF200C, but it's a small and light option we stock.
Specifications
- Sensor: ST VL53L0X
- Range: up to about 2 m (depends on target and lighting)
- Emitter: 940 nm Class 1 laser (eye-safe)
- Interface: I2C, default address 0x29
- Supply voltage: 2.6–5.5V (onboard 2.8V regulator)
- Board size: about 25 × 12.5 mm
- Headers: included, not soldered
Pin Definitions
- VIN — Power in, 2.6–5.5V
- GND — Ground
- SCL — I2C clock
- SDA — I2C data
- GPIO1 — Interrupt output
- XSHUT — Shutdown — pull low to turn off
Project Ideas
A necklace that reacts as people approach, a bag that knows when it's been set down, proximity-reactive LEDs on a costume, or a distance-sensing glove.
Good to know
Peel off the thin protective film over the sensor before use if your board has one. It can block or skew readings.
Pair It With
Pairs nicely with the Adafruit ESP32-C3 QT Py or sewable Beetle ESP32 [Sewable]. Want a protective lens cover? Choose the TOF200C version. For close-range precision, see the VL6180X TOF050C.
In the box
- GY-VL53L0XV2 ToF sensor × 1
- Header pins × 1 set


