Tinker Tailor
Ultra-Narrow WS2812 Smart Digital LED Strip
Ultra-Narrow WS2812 Smart Digital LED Strip
Couldn't load pickup availability
At just 2.7mm wide, this WS2812 2020 LED strip is one of the slimmest individually addressable RGB strips available — perfect for wearables, model builds, and any project where space is tight but you still want full colour control.
Ships next business day from Nova Scotia · 30-day returns · Questions? cmoz@tinkertailor.ca
Add this too
$5.75
Details
Each strip is 8" (approx. 20cm). If you order more than one, we'll keep the strip intact rather than cutting at 8" intervals.
Three connections only: Ground, Power, and Data. Compatible with WS2812B controllers (ESP32, Arduino, Raspberry Pi, etc.) and supported by extensive libraries like FastLED and Adafruit NeoPixel.
Key Features
- Ultra-narrow: 2.7mm wide (2020 LED package)
- Individually addressable RGB — full colour per LED
- Power: DC 5V or DC 12V
- Cuttable along marked lines (retains pads at both ends)
- Flexible and bendable — avoid sharp bends
- Data pad on front; power and ground on reverse
Important notes
- Soldering required — pads are tiny, so confident soldering skills recommended
- Controller and power supply not included
- White may appear orange at low voltage — increase voltage for accurate white
- Fragile — avoid sharp bends or kinking
Related products
- Want a wider, easier-to-solder strip? Try the 60/meter RGB Pixel Strips.
- Need a short starter strip? Check out the *mini* 10 RGB Pixel Strip.
Want code for these lights without the headache? Preview your effects and copy a ready-to-run PlatformIO or Arduino sketch with the CMozGlow code generator. Learn more about the CMozGlow library.
