Maker Corner: Tiny LED Shapes for Wearables, and Where to Start
Welcome to this month's Maker Corner. Instead of chasing headlines, I want to spend this one on something that has been quietly growing in the shop and in my own workshop: small addressable LEDs in lots of different shapes. If you have ever wondered which one belongs in your wearable, this is a short field guide.
Why shape matters
Every WS2812B (NeoPixel-compatible) pixel does the same job: one data wire, any colour you ask for. What changes from board to board is where the light sits. A ring puts light around a point. A rectangle puts it in a line or a grid. A single pixel puts it exactly where you sew it. Choosing the shape first makes the rest of the design easier, because the shape tells you what animation will look good.
The small ones
These are the pieces I reach for when a project needs a detail rather than a display.
- Single WS2812B RGB Pixel Module with sewable pads ($1.45 CAD). One pixel, exactly where you want it. Good for a glowing eye on a plush, a status dot on a sleeve, or a light along a seam.
- 3-LED RGB Circuit Ring ($2.95 CAD). Tiny enough for badges, pendants and earrings.
- 7-LED RGB Circuit Ring ($4.45 CAD). Six pixels around the edge and one in the centre, which makes a convincing eye, flower or brooch.
- 4-LED RGB Rectangle Board ($2.75 CAD). A little square for status lights and bag or sleeve details.
The ones with room to animate
When you want movement, you need more pixels in a row or a loop.
- 16-LED RGB Rectangle Board ($7.95 CAD). Enough pixels for scrolling patterns and simple icons.
- 8-Bit WS2812 RGB LED Ring Module ($5.95 CAD). A neat ring that is easy to test and good for spinning effects.
- 24-LED RGB Circuit Ring on a white PCB ($13.95 CAD). Smooth, fluid animations because the pixels sit so close together.
Not sure? Try them all
If you cannot decide, the WS2812B Sampler Pack ($26.95 CAD) puts eight different shapes in one order. I like it as a teaching tool: put it on a table, ask a group which shape they would use for a project, and watch the ideas start. It is also the cheapest way to find out which shape you actually enjoy working with before buying more.
Making them glow
The hardware is half the story. The other half is the code, and that is what CMozGlow is for. It is the friendly WS2812B library I wrote for wearables and fashion tech, and it is free on the shop: Library and Program for Glow: WS2812B. If you want to see a working build with lights, the Sparkle Up Your Fashion with Neopixels video walks through it on an ESP32.
A few practical notes from my bench:
- Test on a breadboard or with alligator clips before you solder or sew anything.
- Keep the brightness lower than you think you need. Wearables are close to the body, and lower brightness also saves battery.
- Start with a short strip of pixels and get one animation working before you add more.
If you would rather not solder
The Sparkle Lights Video Kit is the no-solder way in. It has everything used in the video build in one box, so you can follow along and have lights working the same day. It is a good one for a first project or for someone you are shopping for this season.
What is coming up
Two things are on my calendar. I am live on Wednesdays, so bring your questions and your half-finished projects. And I am running my first online ESP32 workshop on December 3 and 5, where we wire up a screen and send messages to it from a phone. The details are in Build It Live With Me.
That is it for this month. If there is a shape you wish existed, reply and tell me what you would build with it. Those messages shape what I stock next.