Details
Also available in pink, and you can see the larger ESP32-S3 SuperMini if you need more pins or native USB features.
Good to know before you buy
- Single-core RISC-V at 160MHz. Plenty for sensors, LEDs and WiFi or Bluetooth projects, but not for heavy graphics.
- 11 GPIO is enough for most wearables, but plan your pins before you start a bigger build.
- The onboard blue LED is on GPIO8, which is handy for a first blink test.
- Uses USB-C for power and programming.
PlatformIO setup
Add this to your platformio.ini so Serial Monitor works over the USB-C port:
[env:esp32-c3-supermini] platform = espressif32 board = esp32-c3-devkitm-1 framework = arduino monitor_speed = 115200 build_flags = -DARDUINO_USB_MODE=1 -DARDUINO_USB_CDC_ON_BOOT=1
If the board doesn't show up for uploading, hold BOOT, tap RESET, then release BOOT and try again.
Specs
- ESP32-C3, 32-bit RISC-V, up to 160MHz
- 400KB SRAM, 384KB ROM, 4MB flash
- WiFi 802.11 b/g/n (2.4GHz) and Bluetooth 5.0 (LE)
- 11 GPIO, all PWM capable
- 4 analog inputs
- 2 UART, 1 I2C, 1 SPI
- Deep sleep around 43µA, good for battery-powered projects
- Hardware security: AES, RSA, hash acceleration, secure boot
- Reset and boot buttons
- Size: 22.52 × 18mm
Pair it with
- Single WS2812B pixels or the 12-LED ring for light
- MPR121 touch sensor to turn conductive fabric into buttons
- 0.91" OLED for a tiny display
Downloads for this Product




